|
Direct Rotary Drill Rig
Product Details:
Product Description
Direct Rotary Drill Rig
JCR DR Series | JCR DR -2500 | JCR DR 1500 | |||
Capacity | |||||
Drill Pipe | 73MM | 89 MM | 60mm | 73mm | 89mm |
Hole Diameter | 200/215 mm | 215/315mm | 145mm | 152.4/203 mm | 203/254 mm |
Depth | 770 Mfr. | 600 Mfr. | 770 Mfrs. | 610 Mfrs | 457 Mfrs |
Casing Load Mast: (Using Tripal sheave Traveling Block (6 Lines) | 30,000 Kgs. | 18500 kgs | |||
Construction (Tubular Steel, Electrically welded) | |||||
Height (High above ground level) | 14 Mfrs. | 13 Mfrs | |||
Gross Load Capacity | 35.000 Kgs. | 31820 kgs. | |||
Hook Load Capacity (With Double sheave traveling block) | 18.200 Kgs. | 18.200 Kgs. | |||
Raising and Lowering | 2 Hydraulic Cylinders | 2 Hydraulic Cylinders. | |||
Crown Block | 6 Sheave Plus 1 Catline Sheave. | 5 Sheave Plus 1 Catline Sheave. | |||
Drilling Head | Type:Integral with draw works and pull down cylinders drive through torque tube and disc type clutch. | ||||
Opening | 108 mm | 90 mm or 108mm | |||
Retraction | 525 mm | 525 mm | |||
Pull Down (Optional) | |||||
Type | Through 2 Nos. Hydraulic | ||||
Cylinders. | Stroke: 762 mm | 762 mm | |||
Force | Up 16,000 Kgs and Down 10,600 Kgs. | Up to706 Kgs. | |||
Draw Works | Barrel Dia. X Length Single | Line Pull Bare Drum | |||
Hoisting Drum | 178 MM X 216 MM | 7000/6820 Kgs. | |||
Auxiliary Drum | 178 MM X 216 MM | 7000/6820 Kgs | |||
Clutch | 406 MM, 2 plates mechanical type (Air Clutch Optional) | ||||
Brakes | 470 MM X 100 MM Mechanical High Leverage type double equialised. | ||||
Drive | By Chain. | ||||
Transmission | Five forward and one speed reverse. | ||||
Sub Drive Case | Suitable for mounting automotive gear box and to obtain hydraulic pump drive. | ||||
Hydraulic | Pump fixed displacement vane type discharge 8 pressure 90 /8oLPM @105 Kg/cm2/703 kg/Cm2. | ||||
Mud Pump | Suitable Capacity | ||||
Drive | “V” Belts / Chain /Hydraulic Control) | ||||
Leveling lacks | 4 Mechanical Jack (Optional Hydraulic) | ||||
Lighting | From truck battery or dynamo optional lighting generator. | ||||
Controls | Centralized for single person operation | ||||
Prime Mover | Single or Double Engines, separate lighting generator. | ||||
Mounting | Truck Chassis or Two/Three Axle Trailer/ Skid. | ||||
Optional Available | Hydraulic Break Out, Welding Generator, Pull down chuck. DTH attachment, wire line hoist and higher rotary for core drilling application. | ||||
Specifications are subject to change with notice due to continued research and development. |
Other Products in 'DTH Drilling Rigs' category
JCR DRILLING GHANA LIMITED
No.23, Dome Pillar2, Accra, Ghana
Contact No; +233 021 404502, +233 024 4535989
JCR RIGS KENYA LIMITED
Semco Ltd. Box 49820-00100, NBI.
Plot L.R 12715/213, Mombasa Road,
Mavoko Munispal Council, Nairobi.
Cell" +254731389456
- Contact Details
- JCR DRILLSOL PVT. LTD.
GST : 29AAACP9887B1Z0
- No. 20-B, Second Phase, Peenya Industrial Area, Bengaluru - 560058, Karnataka, India
|
|
JCR DRILLSOL PVT LIMITED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |